Foshan Rockpearl Building Materials Co.,Ltd

High quality product, professional service, being the core supplier in laser industry!

Home > Exhibition > Content
10 Tips for doing Well tiles layout
- Apr 21, 2018 -

10 Tips for doing Well tiles layout

 

Some inexperienced workers often pave tiles once get it, and until half of the paving finds the overall asymmetry or inconsistency. At this time, if pave it again will undoubtedly increase the cost of pave, it will also cause loss of tiles. In order to avoid this situation, it is generally recommended to make a tiles layout before paving tiles, which can be used to reduce the loss of tiles according to the plan, but also to ensure the final paving effect.

Wrong case

blob.png

There is no plan to pave in advance, and the wall transfer location is not handled well, and the outlet square hole is not beautiful


The role of tiles layout picture

Cost control: When the tiles are layout, arrange cut the plan, ensure that the tiles are as large as possible and make full use of the corner tiles to reduce the loss rate.

To ensure aesthetics: the location of tiles, doors and windows, wall and floor seams, etc., can be considered in advance when rowing tiles to avoid blind construction.

 

The skill of tiles layout

When the wall and floor tiles have the same specifications, the gaps between the walls and the floor tiles shall pass through. (If the specifications are not the same, it is not required.)

blob.png

 

In general, except for irregular positions, use the whole tile as much as possible. (But you also have to consider the appearance properly, do not blindly ignore the effect.)

 

 

Non-whole tiles should be used as far as possible on secondary sites and parts where the line of sight is not obvious, such as the inside corners, floor side walls or cabinets. In case of yin and yang corners, tiles are erected from Yangjiao, and cut tiles are used at the inside corners.

blob.png

 

The best arrangement of wall tiles is consistent with the line of the doors, windows, and holes. Two-way tiles are raised from the opening and the half tiles on the upper side of the door and window are evenly centered.

blob.png

Appropriate use of wave lines and pass-door stones can add a lot of color to the brick effect.

blob.png

There is a waistline on the wall, and the whole tile is raised on the waist line.

blob.png

Bar type space floor (such as entrance, aisle, kitchen) should be a brick in the middle of the doorway

 

blob.png

 

Square, rectangular, large-area ground should be the main line of sight of the main entrance to the inside or outside corner of the whole brick.

blob.png

 

On the upper side of the bathtub, on the upper side of the washbasin, and on the upper side of the cabinet as much as possible to use the whole brick, avoid tiles too close to the water.

blob.png